This kit includes (1) AirDog® FPII-200 4G Demand Flow System, (1) FF200-MG-6 Fuel Filter, (1) WS200-WS Water Separator, (1) 5E-2-010 Wiring Harness with Indicator Light, (2) Mounting Brackets with Hardware, 7 Feet of DOT Air/Vapor Return Line, and (1) CAT 3406E, C10-13, C15, C16, & C18 Engine-Specific Fitting Kit (all fittings needed in most cases).
Optional Kits Available:
– Optional Performance Upgrade Kit – Caterpillar® Secondary Fuel System Upgrade Kit: Part # UPG-CAFS or UPG-CAFS40 (40-pin ECM) for maximum performance for Caterpillar 3406E, C10-13, C15, C16, & C18 engines.
– Sandwich Mount Bracket Kit (Part # SBK-1000): This kit includes (3) sandwich mounting plates and all needed hardware. The sandwich bracket slides right over the existing frame with no drilling required.
The AirDog® FPII-200 4G uses the AirDog® FF200-MG-6 or equivalent fuel filter and WS200-WS or equivalent water separator. For maximum performance, use of the PureFlow™ WS200-WS and FF200-MG-6 are recommended, as the filters were designed for use with the AirDog® system. For filter cross reference info, click here.
|Dimensions||22 × 15 × 9 in|
You may also like…
A7SOCA701: AirDog® Champ II™ Spin-On Caterpillar Unit using CAT 1R-0749 or 1R-0750 Filter$549.00 Add to cart
SBK-1000: Sandwich Mount Bracket Kit for AirDog® & Champ™$95.00 Add to cart
UPG-CAFS: Caterpillar® Secondary Fuel System Upgrade Kit$303.00 Add to cart
WS200-WS: AirDog® FPII Commercial System Water Separator (wire screen with drain)$30.00 Add to cart
FF200-MG-6: AirDog® FPII System Fuel Filter 6 Micron (Microglass Media)$39.00 Add to cart
FHK-1000: AirDog® Positive Temperature Coefficient (PTC) Heater Kit$159.00 Add to cart