$1,239.00
Description
SKU: A3SPBT412
This kit includes (1) AirDog® FPII-150 4G Demand Flow System, (1) FF200-MG-6 Fuel Filter, (1) WS200-WS Water Separator, (1) 5E-2-010 Wiring Harness with Indicator Light, (2) Mounting Brackets with Hardware, 10 Feet of 3/8″ Low Pressure DOT Air/Vapor Return Line, 8 Feet of 1/2″ Low Pressure DOT Air/Vapor Return Line, and (1) Volvo VED-12, D11, D12, D13, D16, Mack MP7 & MP8 Engine-Specific Fitting Kit (all fittings needed in most cases).
**For engines WITHOUT a frame-mounted fuel/water separator**
No Drill Mounting Option – Sandwich Mount Bracket Kit (Part # SBK-1000): This kit includes (3) sandwich mounting plates and all needed hardware. The sandwich bracket slides right over the existing frame with no drilling required.
The AirDog® FPII-150 4G uses the AirDog® FF200-MG-6 or equivalent fuel filter and WS200-WS or equivalent water separator. For maximum performance, use of the PureFlow™ WS200-WS and FF200-MG-6 are recommended, as the filters were designed for use with the AirDog® system. For filter cross reference info, click here.
UPC: 810025913366
Additional information
Weight | 27 lbs |
---|---|
Dimensions | 22 × 15 × 9 in |
You may also like…
-
WS200-WS: AirDog® FPII Commercial System Water Separator (wire screen with drain)
$30.00 Add to cart -
FF200-MG-6: AirDog® FPII System Fuel Filter 6 Micron (Microglass Media)
$39.00 Add to cart -
FHK-1000: AirDog® Positive Temperature Coefficient (PTC) Heater Kit
$159.00 Add to cart -
SBK-1000: Sandwich Mount Bracket Kit for AirDog® & Champ™
$95.00 Add to cart